- Use the included brush to clean the device at least once every 2 weeks to maintain optimal efficiency and extend its service life.
- The replacement trapping net should never be filled more than ¾ of its total capacity.
- Follow the instructions for replacing the trapping net regularly to avoid overfilling and ensure optimal performance.
- For best performance, use only original Mosqitter® replacement trapping nets, available at Mosqitter.com.
Trapping Net Replacement
1.Before performing maintenance, always press the power button to switch off the device and then disconnect the device from the power supply.
2.Press the lower base (container) lock button.
3. Carefully twist the base counterclockwise.
4.Detach the base (container) from the main unit.
5.Turn the insect-filled replaceable net counterclockwise.
6. Remove the used replacement trapping net and place it in the disposal bag included in the accessory kit.
7. Discard the used replacement trapping net in the trash.
8. If necessary, clean the fan and internal parts of the device using the included cleaning brush.
9. Install a new replacement trapping net by twisting it clockwise until it locks in place. Check that it is securely attached.
10. Reattach the lower body to the main unit.
11. Secure the lower body by twisting it clockwise and ensure the lock button clicks into place – this indicates correct installation.
WARNING: If installed incorrectly, the device will not activate. It is equipped with a safety system that prevents operation when the lower body (container) is removed.